Adjusting The Paper Supports; Release The Paper Chains (Cabinet Model) - Printronix ProLine 5 Series Manual

Adjusting Paper Supports
1. Slide the paper supports inward until they are approximately four inches from
the tractor door.

Release the Paper Chains (Cabinet Model)

Tie Wrap
1. Open the rear cabinet door.
2. Cut the tie wraps and release the paper chains from the bags at the top rear
of the printer frame. Remove the tie wraps and bags.
3. Make sure each chain hangs freely, with no kinks or knots.
2–8
Tractor Door
Paper Supports
Tractor Door
Tie Wrap
Paper Chains
Plastic Bags
Setting Up the Printer