Incoming Call Features - Panasonic KX-TDA50 Feature Manual

1.9 I

1.9.10 INCOMING CALL FEATURES

Description
Each CO line functions as either a public line or a private line. Private lines are used to connect different
PBXs and form a private network (→ 1.13.13 PRIVATE NETWORK FEATURES), while public lines connect
a PBX to a public network, i.e., the telephone company. Certain PBX features are available depending on
the networking type (public or private) of each CO line.
1.
Networking Type Used by Each CO Line
Each CO line port (channel) of a CO line card is assigned a port (channel) type which determines the
CO line's networking type—public or private.
→ 2.7.17 [1-1] Slot—T1 Port (KX-TDA100/KX-TDA200/KX-TDA600 only)—Trunk Property (for TIE
channel)
→ 2.16.2 [10-2] DIL Table & Port Settings—DIL—Trunk Property
CO Line
Card
LCOT
T1
PRI
IP-GW
Default
Available
2.
Distribution Method
Each public CO line port (channel) can use a different method of directing calls to their destinations as
they are received.
Distribution Method
Direct In Line (DIL)
Direct Inward Dialing
(DID)
Calling Line Identification (CLI) distribution is the most customizable call distribution method available.
It allows calls from specific people to be directed to specific destinations, based on the callers'
telephone numbers. CLI distribution, when enabled for the current time mode, takes precedence over
DIL or DID distribution.
154 Feature Manual
Port (Channel)
Type
Public
ELCOT / LCOT
GCOT
DID
TIE (E&M)
OPX (EXTN.)
CO
Extension
QSIG-Master
QSIG-Slave
Directs a call to a preprogrammed destination, such
as an operator, based on the CO line carrying the
call.
Directs a call received on a DID line to a
preprogrammed destination based on the telephone
number dialed by the caller.
Networking Type
Private
Description Details in
• 1.4.6 DIL (Direct
In Line)
• 1.4.5 DID (Direct
Inward Dialing)