Panasonic KX-TDA50 Feature Manual page 261

Calls can be distributed to member extensions using different
methods
The CS is less likely to be busy; ringing all member PSs uses only
one CS channel
Members can log-in, log-out, and use Wrap-up time, ICD Group
button
Both PTs and PSs can belong to the same group
Each member can belong to more than one group
Calls can wait in a queue if they cannot be answered
[Example of CS Channels Used for PS Ring Group Calls and ICD Group Calls]
PS Ring Group
Member
Incoming call
PS Ring Group
Member
Explanation:
The PS ring group has four (for KX-TDA50) or six (for KX-TDA100/KX-TDA200/KX-TDA600) members
which are in range of two different CSs. When a call arrives, each CS uses one channel to ring all member
PSs within its range.
The ICD group has one proprietary telephone (PT) member, as well as four (for KX-TDA50) or six (for KX-
TDA100/KX-TDA200/KX-TDA600) PS members which are in range of two different CSs. When a call
arrives, each CS uses both (for KX-TDA50) or all three (for KX-TDA100/KX-TDA200/KX-TDA600) of its
channels to ring each of the member PSs within its range.
Conditions
• A maximum of 32 PS ring groups can be programmed.
Features
PS Ring Group
Member
PS Ring Group
Member
PS Ring Group
PS Ring Group
Member
PS Ring Group
Member
PS Ring Group
ICD Group
Member
ICD Group
Member
ICD Group
ICD Group
Member
ICD Group
Member
1.13 P
ICD Group
ICD Group
Member
Incoming call
ICD Group
Member
ICD Group
Member
Feature Manual 261