Panasonic KX-TDA50 Feature Manual page 327

Parameter
Answer by Mailbox
(Default)
AA
None
b)
Intercept Routing to a Mailbox of the VPS
The PBX sends a mailbox number of the corresponding extension to the VPS when a CO line call
is intercepted from an extension to the VPS. Therefore the caller can leave a message for the
called extension without knowing the mailbox number.
[Intercept Routing to the VPS Sequence Selection]
If an extension user sets Intercept Routing to the VPS, the intercepted CO line calls will be
redirected to the VPS.
It is also possible to send the AA command, even in the VM service mode, when calls are
intercepted so that the caller can be directed to an extension rather than a mailbox. This can be
performed by selecting "AA" through system programming.
→ 2.9.18 [3-8-1] VM(DTMF) Group—System Settings—Others—Intercept Routing to the VPS
Sequence
Parameter
Answer by Mailbox
AA
None (Default)
[Example of a) & b)]
CO Line Call
Transfer
Operator
Transmitted Command
In AA Service Mode
Switching to VM command +
Recording message command (#6
+ H [H = Mailbox No.])
Switching to AA command (#8)
(DTMF commands are not sent. Work with default of the VPS.)
Transmitted Command
In AA Service Mode
Switching to VM command +
Recording message command (#6
+ H [H = Mailbox No.])
Switching to AA command (#8)
(DTMF commands are not sent. Work with default of the VPS.)
Sent "#6" + "102".
PBX
Switching to VM command
FWD, Intercept
Extn. 102
In VM Service Mode
Recording message command (H
[H = Mailbox No.])
Switching to AA command (#8)
In VM Service Mode
Recording message command (H
[H = Mailbox No.])
Switching to AA command (#8)
mailbox number
VPS (In AA service mode)
VM Port 1 VM Port 2
VM (DTMF)
Group
VM Port X
VM Port 3
1.19 V
Feature Manual 327