Panasonic KX-TDA50 Feature Manual page 249

[Example]
PBX-1
Extn. 1000 Extn. 1001
Dials "2000".
PBX-1
3
Extn. 1000 Extn. 1001
Conditions
• This feature can be enabled or disabled on each ISDN (QSIG) port of the PBX.
Programming References
PC Programming Manual
2.7.14 [1-1] Slot—PRI Port (KX-TDA100/KX-TDA200/KX-TDA600 only)—Supplementary Service—COLP,
CLIR, COLR, CNIP, CONP, CNIR, CONR, CF (Rerouting), CT, CCBS, E911
2.7.32 [1-3] Option—New Card Installation—ISDN Standard Mode for PRI23 Card (KX-TDA100/KX-
TDA200/KX-TDA600 only)
PT Programming Manual
None
Operating Manual References
1.3.29 FWD (Call Forwarding)
QSIG
PBX-2
1 Call to 2000
2
Forwarded
to 1001
Extn. 2000
(Forward Destination
of CO Line Calls: 1001)
QSIG
PBX-2
Extn. 2000
Extension 1000 of PBX-1 dials extension
1
number "2000", and the call is sent to
extension "2000" of PBX-2 through QSIG
network.
The call is forwarded to the forward
2
destination of CO line calls of extension
2000, which is extension "1001" of PBX-
1.
The call between PBX-1 and PBX-2 is
3
released, and the call is connected
directly to the forward destination of
extension 2000.
1.13 P
Feature Manual 249