Panasonic KX-TDA50 Feature Manual page 158

1.9 I
When the original destination is:
*
• DISA
• PS Ring Group
• External Pager (TAFAS)
• Analog/ISDN Remote Maintenance
• Other PBX Extension (TIE with no PBX Code)
* Intercept Routing for DISA will redirect a call only if all of the Direct Inward System Access (DISA)
ports are busy. If Intercept Routing is activated after a call from DISA reaches the destination
extension, the Intercept Routing settings assigned to that extension will be applied.
** By assigning the forward destination of a Virtual PS to a PS Ring Group or external pager, and
assigning Intercept Routing destinations to the Virtual PS, calls to these destinations will be redirected
to the Intercept Routing destination of the Virtual PS.
Programming Example
When extension 2001 is called from another extension or is the first destination
of an incoming CO line call, etc., the call will ring at extension 600 (external pager)
first, and then ring at the intercept destination (extension 1001) after the IRNA
Timer expires.
158 Feature Manual
**
**
<Forward Destination of Virtual PS>
Ext. No. of the Virtual PS FWD Destination
2001
...
<Intercept Destination of Virtual PS>
Ext. No. of the Virtual PS
Day
2001
...
The Available Intercept Destination is:
If all DISA ports are busy when a call is made using
DISA, one of the following can be selected through
system programming:
• Disable: Busy tone is sent to the caller. When
using an analog CO line, a ringback tone is sent.
• Operator: The call will be redirected to the
operator.
• AA-0, AA-9: The call will be redirected to the
destination assigned to that AA number.
→ 2.11.3 [5-3-1] Voice Message—DISA System—
Option 1—DISA Intercept—Intercept when all DISA
ports are busy
Not assignable (Intercept Routing is not available.)
"600" is an example of a
Floating Extension No.
for the External Pager
600
...
Intercept Destination
Lunch Break Night
1001 1001 1001 1001
... ... ...
...
...
...
...