Panasonic KX-TDA50 Feature Manual page 20

1.1 A
Modify Command: When a call is made using this carrier, the telephone number must be modified to
meet the criteria required by the carrier in order to connect the call. Program here the commands
needed to modify the user-dialed number as necessary.
[Command Explanation]
Command
C
H
P
A
G
I
[0-9, , #]
[Programming Example: Carrier Table]
Carrier Name
Trunk Group
Carrier Access Code
Removed No. of Digits
Modify Command
→ 2.14.6 [8-5] Carrier—Carrier—Carrier Name
*1
→ [350] ARS Carrier Name
→ 2.14.6 [8-5] Carrier—TRG 01–TRG 64 (KX-TDA50/KX-TDA100/KX-TDA200), or TRG 01–
*2
TRG 96 (KX-TDA600)
→ [351] ARS Trunk Group for Carrier Access
→ 2.14.6 [8-5] Carrier—Carrier—Carrier Access Code
*3
→ [353] ARS Carrier Access Code
→ 2.14.6 [8-5] Carrier—Carrier—Removed Number of Digits
*4
→ [352] ARS Removed Number of Digits for Carrier Access
→ 2.14.6 [8-5] Carrier—Carrier—Modify Command
*5
20 Feature Manual
Inserts the Carrier Access Code
Inserts the user-dialed number minus any removed digits
Analog Line: Inserts a pause
ISDN/T1 Line: Inserts a pause and changes dialing mode to tone (DTMF)
Inserts the Authorization Code for Tenant
Inserts the Authorization Code for Trunk Group
Inserts the Itemized Billing Code
You can enter any of these digits in a modify command
Carrier 1
*1 Carrier A
*2 1, 2, 3
*3
0880
*4
1
*5 CH
In this example
Dialed number: 9-1-212-555-5555
Modification:
9 1 2125555555
Remove 1 digit
CO Line Access no. is ignored
Description
Carrier 2
Carrier J
4
0700
3
CPH
0880 2125555555
Add the Carrier Access Code