Panasonic KX-TDA50 Feature Manual page 302

1.17 T
b)
Day/Night/Lunch button
c)
Day/Night/Break button
d)
Day/Night/Lunch/Break button
These buttons can be used to switch the current time mode: pressing the Day/Night button will toggle
between the day and night modes, for example.
Each Time Service button will display the current time mode using a different light pattern or color, as
shown below.
Light Pattern
Off
Red on
Green on
Slow green flashing
Slow red flashing
Note
Pressing a Time Service button will change the current time mode only if the COS assigned to the
extension is authorized to do so or if the extension is assigned as a manager. All other extension
users can press this button on their proprietary telephones (PTs) to display the current time mode.
Conditions
• The start times of the following time modes can be specified through PC programming as well as PT
programming.
– Day 1 and 2
– Lunch
– Night
The start and end times of the following break modes can be specified through PC programming only.
– Break 1
– Break 2
– Break 3
Note that if an end time is programmed for a break, the day mode will start or resume at this time, as
shown previously in "Visualization of Time Schedule for Tenant 1" example. If no end time is
programmed, the break will continue until the start of the next time mode, as shown in Time Table 4 in
"Visualization of Time Schedule for Other Tenants".
• Time Service Switching Mode (Automatic/Manual) Button
Any flexible button can be customized as the Time Service Switching Mode (Automatic/Manual) button.
Programming References
PC Programming Manual
2.8.5 [2-4] Week Table
2.8.7 [2-5] Holiday Table
2.8.8 [2-6-1] Numbering Plan—Main—Features—Time Service (Day / Lunch / Break / Night) Switch
2.8.11 [2-7-1] Class of Service—COS Settings—Extension Feature—Time Service Switch
2.10.5 [4-1-4] Wired Extension—Flexible Button
302 Feature Manual
Current Time Mode
Day
Night
Lunch
Break
Holiday