Panasonic KX-TDA50 Feature Manual page 299

Time Mode
Switching
Automatic The current time mode will switch
automatically to another time mode at
the time programmed in the tenant's
Time Table, and can be switched
manually by pressing the Time Service
button or by dialing the Time Service
Switch feature number.
Manual The current time mode will switch only
when the Time Service button is pressed
or when the Time Service Switch feature
number is dialed.
2.
Time Table
Each tenant has a Time Table that is used when the tenant is in Automatic Time Service Switching
mode. Each Time Table has four basic modes—day, lunch, break, and night—and also provides for
multiple "breaks", such as morning breaks and afternoon breaks, and multiple "days", such as the
morning shift and the afternoon shift following lunch.
A tenant's Time Table is programmed to control when each time mode starts (and therefore, ends) and
can be programmed separately for each day of the week.
Each Time Table has a number which corresponds to the tenant number of the tenant it serves. (Tenant
1 uses Time Table 1, etc.)
[Programming Example: Time Table]
Time Schedule
MON Day 1
Lunch
Day 2
Break 1 start
Break 1 end
Break 2 start
Break 2 end
Night
TUE Day 1
[Visualization of Time Schedule for Tenant 1]
Monday
00:00
Time Table No. 1
Description
Time Table No. (Tenant No.)
1 2 3
09:00 15:00 11:00
12:00 18:30
13:00 19:00
15:00 20:30
15:15 20:45
22:30
22:45
18:00 01:00 22:00
09:00 15:00 11:00
03:00 06:00 09:00
Night Day 1
The current time mode (day/lunch/break/
night) and the switching mode
(automatic/manual) can be switched
manually by an extension assigned as a
manager, or by an extension whose
Class of Service (COS) is authorized.
4
12:00
15:00
18:00
06:00
21:00
21:15
06:15
12:00 15:00 18:00
Lunch Day 2 Break 1
1.17 T
Condition
Tuesday
21:00 00:00
Night
Feature Manual 299