Panasonic KX-TDA50 Feature Manual page 180

1.11 M
Pattern 11
OFF
Pattern 12
OFF
• It is possible to leave a Message Waiting notification while hearing a ringback tone, busy tone, or DND
tone.
• Messages are always left on the original destination extension, regardless of that extension's FWD
settings. (→ 1.6.6 FWD (Call Forwarding))
• Both the calling extension and the called extension can cancel a notification after it has been left.
• If the extension that received a notification calls back the extension that sent the notification, and the
call is answered, the notification will be cleared automatically. However, if a voice message has been
left on the VPS, whether the notification is cleared or not depends on the VPS settings.
Programming References
PC Programming Manual
2.7.4 [1-1] Slot—Extension Card Property—SLT Power Supply (KX-TDA100/KX-TDA200/KX-TDA600 only)
2.8.8 [2-6-1] Numbering Plan—Main—Features—Message Waiting Set / Cancel / Call Back
2.8.10 [2-6-3] Numbering Plan—B/NA DND Call Feature—Message Waiting Set
2.8.17 [2-9] System Options
→ Option 3—Dial Tone—Distinctive Dial Tone
→ Option 5—SLT—Message Waiting Lamp Pattern (KX-TDA100/KX-TDA200/KX-TDA600 only)
2.9.18 [3-8-1] VM(DTMF) Group—System Settings—VM DTMF Command—Listening Message
2.10.1 [4-1-1] Wired Extension—Extension Settings—Main—SLT MW Mode (KX-TDA100/KX-TDA200/KX-
TDA600 only)
2.10.5 [4-1-4] Wired Extension—Flexible Button—Type
2.10.13 [4-2-3] Portable Station—Flexible Button—Type
2.10.17 [4-3] DSS Console—Flexible Button—Type
PT Programming Manual
None
Feature Manual References
1.6.3 Flexible Buttons
2.1 Capacity of System Resources
Operating Manual References
1.3.42 Message Waiting
180 Feature Manual
10.24 s
t
t=1.28 s
ON
10.24 s
t
t=1.28 s
ON
10.24 s 20.48 s
10.24 s 20.48 s