Walking Cos - Panasonic KX-TDA50 Feature Manual

Hybrid ip-pbx
Hide thumbs Also See for KX-TDA50:
Table of Contents

Advertisement

1.20 W
1.20 W

1.20.1 Walking COS

Description
A user can enter his extension number and extension personal identification number (PIN) (→ 1.5.6
Extension PIN (Personal Identification Number)) at another extension, to make the following types of call
using his Class of Service, including TRS level, overriding the other extension's Class of Service.
CO line call
TIE line call
Intercom call
External Relay Control (→ 1.5.8 External Relay)
After performing Walking COS, the following features are also available for the specified extension:
Call Forwarding (FWD)/Do Not Disturb (DND) setting (→ 1.4.9 DND (Do Not Disturb), → 1.6.6
FWD (Call Forwarding))
Incoming Call Distribution Group Log-in/Log-out (→ 1.9.3 ICD Group Features—Log-in/Log-out)
Absent Message setting (→ 1.1.1 Absent Message)
Extension Dial Lock (→ 1.5.4 Extension Dial Lock)
Time Service—Changing the Time Mode (day/lunch/break/night) (→ 1.17.5 Time Service)
CLIP number setting (CLIP ID) (→ 1.3.13 CLIP (Calling Line Identification Presentation))
Conditions
When a CO line call is made using Walking COS:
the Class of Service of the specified extension is applied (→ 1.3.19 COS (Class of Service))
the Itemized Billing code of the specified extension is applied (→ 1.1.3 ARS (Automatic Route
Selection))
the specified extension number is recorded on SMDR as the call originator, instead of the
extension number of the actual extension used (→ 1.16.1 SMDR (Station Message Detail
Recording)).
Walking COS is also available through DISA. (→ 1.4.7 DISA (Direct Inward System Access))
Extension PIN
An extension personal identification number (PIN) is required to use this feature. (→ 1.5.6 Extension
PIN (Personal Identification Number)) If the wrong PIN is entered three times, the line will be
disconnected.
This feature can not be used for extensions which the extension being operated is prevented from
calling by Internal Call Block. (→ 1.9.14 Internal Call Block)
Programming References
PC Programming Manual
2.8.8 [2-6-1] Numbering Plan—Main—Features—User Remote Operation / Walking COS / Verification
Code
2.8.11 [2-7-1] Class of Service—COS Settings—Extension Feature—Remote Operation by Other
Extension
2.10.1 [4-1-1] Wired Extension—Extension Settings—Option 2—Extension PIN
332
Feature Manual

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-tda200Kx-tda600Kx-tda100

Table of Contents