Installing The Software; Installation Procedures - Nortel Passport 4400 Using Manual

38
• If you are reinstalling Install Tool, see
Tip" on page 36
• It is recommended that you close all other applications on your workstation.
• If Windows Dial-Up Networking is not installed on your workstation, decide
which COM port you are using before starting the installation.

Installing the Software

Use the procedures that follow to install the Passport 4400 Install Tool software.

Installation Procedures

To install the Install Tool program and any additional required software
components, complete the following procedures.
Starting the Installation
To start the installation program, follow these steps:
1
Start Windows Explorer and open the directory containing the executable file.
If you are installing from the distribution CD, open the software directory,
then open the installtool directory.
2 Double-click the executable file name.
3 The first installation window opens, prompting you to continue.
4
Click on Yes to continue.
206906-D Rev 00 4.2
before starting the installation.
"Null Modem Driver Troubleshooting