Passport 4400 Ip Addressing; Overview; Default Ip Addresses - Nortel Passport 4400 Using Manual

Appendix C

Passport 4400 IP Addressing

This appendix provides a brief overview of the IP addressing requirements for
configuring Passport 4400s for either bridging or routing mode.
Topics in this appendix:
•
•
•

Overview

You can use Install Tool to configure and monitor local and remote
Passport 4400s in your network. To a large extent, the Passport 4400 routing
mode (bridging and routing) determines which nodes in the network will be
accessible through your local connection.

Default IP Addresses

Every factory-defaulted Passport 4400 assigns the following IP addresses:
•
•
Whenever you reset a Passport 4400 to factory defaults, these IP address
assignments are made.
Overview
Default IP Addresses
Bridging and Routing Modes
Assigns 192.168.200.200 to the bridge interface.
Assigns 192.168.200.201 to the workstation connected to the management
port, at the time the Dial-Up Networking connection is established.
Using Passport 4400 Install Tool Version 4.2
113