96
The Telnet window opens.
2
To login to the CLI facility:
a
b
The CLI facility displays a greeting and a prompt.
Establishing a Remote Telnet Connection
You can access a remote Passport 4400 if your Dial-Up Networking function is up
and the IP address is properly configured.
Prerequisites
Before establishing the remote Telnet connection, ensure that you have satisfied
the following prerequisites:
•
Microsoft Dial-Up Networking must be installed on your workstation before
you can establish a remote Telnet session.
206906-D Rev 00 4.2
Type
at the Login prompt, then press Enter.
cli
Press Enter at the Password prompt.
Note: New Passport 4400 units are shipped with a null password. If the
Passport 4400 that you are configuring has been assigned a password, you
will enter it here.