Passport 4400 Device Management Tools - Nortel Passport 4400 Using Manual

18

Passport 4400 Device Management Tools

The Passport 4400 provides the following device management tools:
Tool
Install Tool
Passport 4400
Configurator
Command Line
Interface (CLI)
Passport 4400
Mass Deployment
and Reporting Tool
206906-D Rev 00 4.2
When To Use It
Use Install Tool to set up a factory-new
or factory-defaulted Passport 4400,
such that network connectivity and
basic services are enabled. In addition,
you can use Install Tool to perform
real-time monitoring of Passport 4400s
units in your network.
Use the Configurator to perform any
Passport 4400 configuration task.
Note 1: The Passport 4400
Configurator is an embedded web
interface. It is a built-in component of
Passport 4400 units running software
release 4.0 and higher.
Note 2: To access the Passport 4400
Configurator from within Install Tool,
select Web Configurator from the
System menu.
Note 3: Like Install Tool, the
Passport 4400 Configurator can access
the Passport 4400 through PPP IP
connectivity.
Use the CLI to perform any
configuration task, especially low-level
or specialized tasks.
Use the Mass Deployment and
Reporting Tool to generate
configuration reports and to replicate
the configuration of one unit to multiple
units.
For More Information
Refer to this manual and
the Install Tool online help
for complete
documentation.
Refer to the Configuring
and Operating
Passport 4400 Software
(Nortel Networks part
number 206916) online
documentation.
Refer to the
Passport 4400 Reference
for CLI (Nortel Networks
part number 209666).
Refer to the Using the
Passport 4400 Mass
Deployment and
Reporting Tool (Nortel
Networks part number
209665)