Configuring A Dial-Up Networking Connection; Define A New Connection - Nortel Passport 4400 Using Manual

46
However, you must manually configure a Dial-Up Networking connection,
following the installation of Install Tool. (Refer to
Networking Connection" on page 46

Configuring a Dial-Up Networking Connection

Following the Install Tool installation (and in the case of Windows NT or
Windows 2000, installation of TCP/IP, Dial-Up Networking, and the null modem
driver), you must define and configure a new Dial-Up Networking connection.

Define a New Connection

Microsoft Dial-Up Networking requires definition of a "connection" for each host
system with which the workstation will communicate. (A "connection" is referred
to as a Phonebook Entry in Windows NT.)
Windows 95 Example
To define a new connection in Windows 95, follow these steps:
1 Double-click on My Computer.
2
Double-click on Dial-Up Networking.
3
Double-click on Make a New Connection.
The Make New Connection dialog box opens.
206906-D Rev 00 4.2
"Configuring a Dial-Up
for more information.)