Table of Contents
Advertisement
28
Ethernet Connection
The Passport 4400 is shipped from the factory with a pre-configured IP address
(192.168.200.200). You can connect your workstation to the unit using the
Ethernet port, as long as the workstation is in the same IP segment as the
Passport 4400.
Example
This illustration shows an Ethernet connection on a Passport 4460.
Other Connection Options
If your workstation's Ethernet port is not configured for the same IP segment as
that of the Passport 4400, you must connect your workstation to the unit over the
management port, as described in
page 29
206906-D Rev 00 4.2
Network
Interface Card
and
"Management Port Modem Connection" on page
Passport 4460
EXPANSION
10/100
2
"Management Port Direct Connection" on
STAT
RST
P2 STATUS
P1 STATUS
PORT 1
P3 STATUS
SYSTEM
P
P
STATUS
O
O
R
R
T
T
2
3
LAN Port
30.
Advertisement
Table of Contents
Troubleshooting
