Nortel Passport 4400 Using Manual page 81

5
Repeat steps 1 through 4 for each entry requiring modification.
Caution: If you are communicating with the Passport 4400 through the
LAN, and you change that IP address and then perform a Save & Reset,
Install Tool will be unable to locate your Passport 4400: It will be looking
for the old IP Address. In this case, you will receive the following
message: The system is not up. (See
Install Tool Connection to Your Passport 4400" on page 82
instructions for recovering.)
Deleting Entries
To select and delete one value from a multiple set, follow these steps:
1
Select the desired entry from the drop-down menu.
For example:
2
Highlight the item (such as the IP address or DLCI number) that you wish to
delete.
"If You Need to Reestablish the
Using Passport 4400 Install Tool Version 4.2
81
for