98
b
You are now ready to begin your Telnet session.
Restriction on Reset Operations
Do not issue any reset commands from the Telnet window. If you have made
configuration changes and you need to reset the Passport 4400, first close your
Telnet session, then use Install Tool to perform the reset operation.
Closing the Telnet Connection
To close your session and end your Telnet connection, follow these steps:
1
Select Disconnect from the Connect menu.
The Telnet window clears.
206906-D Rev 00 4.2
Press Enter at the Password prompt.
Note: New Passport 4400 units are shipped with a null password. If the
Passport 4400 that you are configuring has been assigned a password, you
will enter it here.