Diagnostic Indicators; Diagnostic Indicators On The Front Panel - Dell EMC VxRail S Series Owner's Manual

Table 2. Back panel features
Item Indicator, button, or connector
1 Appliance identification button
2 Appliance identification
connector
3 iDRAC8 Enterprise port
4 Half-height PCIe expansion card
slot (3)
5 Serial connector
6 Video connector
7 USB port (2)
8 Full-height PCIe expansion card
slot (3)
9 Ethernet connector (4)
10 Power supply unit (PSU1)
11 Power supply unit (PSU2)
12 Hard drive (2) (back)

Diagnostic indicators

The diagnostic indicators on the appliance indicate operation and error status.

Diagnostic indicators on the front panel

NOTE: No diagnostic indicators are lit when the appliance is turned off. To start the appliance, plug it into a working power
source and press the power button.
Icon Description
The identification buttons on the front and back panels can be used
to locate a particular appliance within a rack.
Press to toggle the appliance identification (ID) on or off.
If the appliance stops responding during POST, press and hold the
appliance ID button for more than five seconds to enter BIOS
progress mode.
To reset iDRAC (if not disabled in F2 iDRAC setup) press and hold
the button for more than 15 seconds.
Connects the optional appliance status indicator assembly through
the optional cable management arm.
Dedicated management port.
Enables you to connect up to three half-height PCI Express
expansion cards.
Enables you to connect a serial device to the appliance.
Enables you to connect a VGA display to the appliance.
Enables you to connect USB devices to the appliance. The ports are
USB 3.0-compliant.
Enables you to connect up to three full-height PCI Express
expansion cards.
Four integrated connectors that include:
• Two 10/100/1000 Mbps RJ45 connectors
• Two 100 Mbps/1 Gbps/10 Gbps SFP+ or RJ45 connectors
AC 1100 W or DC 1100 W
AC 1100 W or DC 1100 W
Up to two hot-swappable 2.5-inch solid state drives.
Overview 9