Diagnostic Indicators On The Front Panel; Health Status Indicator - Dell E01B002 Owner's Manual

Figure 3. Front panel view—dual SSD system
1. USB port
3. SSD
Table 2. Front panel features and indicators—dual SSD system
Item Indicator, button, or
connector
1 USB port
2 USB management port or
iDRAC Direct port
3 SSD (2)
4 Sled power-on indicator,
power button

Diagnostic indicators on the front panel

Health status indicator

The Health status indicator indicates the health condition of the system.
Table 3. Health status indicator codes
Icon
8 PowerEdge FC430 system overview
Icon
Health-status indicator
pattern
Solid blue
Blinking blue
Solid amber
Flashes amber
2. USB management port or iDRAC Direct port
4. Sled power-on indicator, power button
Description
Enables you to connect USB devices to the sled. This port is USB
3.0 compliant.
Enables you to connect USB devices to the sled or provides
access to the iDRAC Direct features. For more information about
iDRAC, see the iDRAC Guide at Dell.com/idracmanuals. This
port is USB 2.0 compliant.
Up to two 1.8-inch hot-swappable uSATA SSDs are supported in
this chassis.
The power-on indicator turns on when the sled is turned on. The
power button controls the power supply output to the system.
Condition
No errors are present in the system. System is in good health.
Identify mode is enabled (regardless of system errors)—system
is in the process of identifying the sled.
System is in failsafe mode—sled is not ready/available and the
chassis cannot be turned on.
Errors present in the system.