LEDs on DAC-SM
The following table describes the LEDs on the DS1-DAC-SM, E1-DAC-SM, and
DS3-DAC-SM:
LED
Pwr
Good
Fail
Redun
YEL (1, 1 to 2,
1 to 12 or
1 to 24)
RED (1, 1 to 2,
1 to 12, or
1 to 24)
296-1011-202 Rel. 5.0, Doc. Rev. 02.01
State
Off
On (green)
On (green)
Off
Off
On (red)
Off
On (green)
On (yellow)
Off
On (red)
Off
Chassis Connections
Checking the LEDs
Meaning
Power off
Power on
Successful system boot: no errors detected
No power: failure detected or on standby
No power
Failure detected
No power or redundancy
A working redundant configuration
Yellow alarm: remote switch is not receiving
a signal from the CVX 600
No alarm
Red alarm: remote switch is not receiving a
signal from the remote switch
No alarm
2-53