Table of Contents
Advertisement
CVX 600 Hardware Installation Guide
Replacing Modules and Filler Panels
Removing a Service Module
To remove a MAC or DAC-SM, follow these steps:
Step
1
2
3-22
Action
Using a 1/4-inch flat-tip screwdriver, turn the locking screw in the upper left
corner of the filler panel 1/4 turn counterclockwise.
Grasp the left and right ejector levers and push them outward to eject the
service module. You will feel the module disconnect from the chassis
mid-plane.
Unlocked position
CVX-0145A
Open ejectors
296-1011-202 Rel. 5.0, Doc. Rev. 02.01
CVX-0158C
Advertisement
Table of Contents
