Grounding The Chassis - Nortel CVX 600 Hardware Installation Manual

Grounding the Chassis

There are two ways to ground the CVX 600 chassis:
• Use the NEBS-compliant dual-connector posts.
• Use the compression terminal.
296-1011-202 Rel. 5.0, Doc. Rev. 02.01
Note: In addition to the grounding location shown in the following
sections, the AC chassis option also contains an identical grounding
location in the upper right corner of the rear of the chassis. Either location
may be used.
Ground cables
Connecting Power to the Chassis
OR
CVX-0244A
To facility ground
CVX_0245A
Chassis Connections
2-17