Table of Contents
Advertisement
CVX 600 Hardware Installation Guide
Replacing Modules and Filler Panels
Installing an SCC-SM
To install an SCC-SM, follow these steps:
Step
1
2
3-14
Action
Make sure that the locking screw is in the unlocked position (slot is horizontal).
Ensure that the ejectors are extended at an angle, but not all of the way.
Ejector
at an
angle
Ejector
at an
angle
Caution: Extending the ejectors all of the way may result in ejector
breakage when attempting to close them in step 4.
Unlocked position
CVX-0145A
Ejector
straight
Ejector
straight
296-1011-202 Rel. 5.0, Doc. Rev. 02.01
CVX-0213B
Advertisement
Table of Contents
