Connecting To 10/100Base-T Interfaces - Nortel CVX 600 Hardware Installation Manual

CVX 600 Hardware Installation Guide
Connecting Network Cables

Connecting to 10/100BASE-T Interfaces

Each 10/100BASE-T interface on the SCC-RLTM supports one full-duplex
connection.
To connect an Ethernet unshielded twisted pair (UTP) cable to a
10/100BASE-T interface, follow these steps:
Step
1
2-8
Action
Plug the UTP connectors into the receptacles.
Optical SCC-II-LTM
5XEthernet SCC-RLTM
3XEthernet SCC-RLTM
296-1011-202 Rel. 5.0, Doc. Rev. 02.01
CVX-0199B