CVX 600 Hardware Installation Guide
Connecting Power to the Chassis
Connecting Power to the Chassis
Before You Start
Make sure you can power the CVX 600 using one of the following power sources:
•
A customer-supplied DC power source with frame grounding (for the DC
chassis option)
•
A built-in AC power module (for the AC chassis option)
Requirements
Before you connect the CVX 600 to power and ground at the installation site:
•
Refer to your company or site specifications for information on the torque
requirements for securing power and ground cables.
•
Make sure the switches on both circuit breaker modules (PDUs) are off (o).
•
Read the
2-16
Circuit breaker (PDU) switches
Fan s
PD U
1
BIP
1
2
3
4
5
6
"Safety Warnings"
BIP
C VX
6o o
PD U
2
ES D
Jac k
on
page
vii.
296-1011-202 Rel. 5.0, Doc. Rev. 02.01
CVX-0202B