CVX 600 Hardware Installation Guide
Installing the CVX 600 Chassis
Hardware Needed to Complete the Chassis Installation
To complete the chassis installation, you need the following hardware:
•
Four (for DC chassis option) or eight (for AC chassis option) truss-head
mounting screws (included in the shipment)
•
Phillips #2 screwdriver
1-22
Caution: A fully configured CVX 600 chassis can weigh about 70 lb.
You should have someone assist you in lifting and holding the chassis in
position at installation time.
296-1011-202 Rel. 5.0, Doc. Rev. 02.01