CVX 600 Hardware Installation Guide
Connecting Equipment to the Console Port
Connecting Equipment to the Console Port
Introduction
You can connect a terminal, PC, modem, or terminal server to the CVX 600, using
the console port on the SCC.
The following procedures provide steps for connecting each piece of equipment:
•
"Connecting a Terminal"
•
"Connecting a PC"
•
"Connecting a Modem"
•
"Connecting a Terminal Server"
2-32
Note: Once you have connected this equipment, you can then edit your
system configuration.
296-1011-202 Rel. 5.0, Doc. Rev. 02.01