Checking The Shipment - Nortel CVX 600 Hardware Installation Manual

Step
3
4
5
6
7
8

Checking the Shipment

Carefully inspect the shipment for completeness, ensuring the items in the
shipping container match those on the packing list affixed to the shipping
container. In particular:
• Confirm that the shipment includes any additional cables you have ordered.
• Check all items for shipping damage.
296-1011-202 Rel. 5.0, Doc. Rev. 02.01
Action
Remove the box containing the accessory kit and other parts. (The AC chassis
option will have two power cords. The DC chassis option will have none.)
Remove the packing material surrounding the chassis.
Using a Phillips screwdriver, remove the six screws that secure the chassis to
the pallet brackets.
Fans
PDU
1 BIP
1
2
3
4
5
6
Phillips screwdriver
Turn counterclockwise
to remove screws.
Using a 9/16-inch wrench, remove the four bolts that secure the pallet
brackets to the pallet.
Remove the four pallet brackets from the pallet.
Carefully remove the chassis from the pallet.
Note: If you detect or suspect any damage, do not install the CVX 600
chassis. See "Technical Support"
Preparing for the CVX 600 Installation
AC PM
AC PM
1
AC PM
2
AC PM
BIP
CV X
6oo
PDU
2
ESD
Jack
on page xviii.
Chassis Installation
Turn counterclockwise
to remove screws.
Phillips screwdriver
CVX-0221A
1-15