CVX 600 Hardware Installation Guide
Replacing Modules and Filler Panels
Replacing the DAC-LTM/-RLTM
If you need to replace an LTM or RLTM, note the configuration of installed
network cabling before you disconnect any cables. You will need to reinstall this
cabling on the replacement LTM.
References
For more information on removing the service module, see
SCC-SM"
3-26
Caution: Before removing the LTM or RLTM, you must first remove the
front-installed service module.
on
page 3-11
or
"Replacing Other Service Modules"
"Replacing the
on
page
296-1011-202 Rel. 5.0, Doc. Rev. 02.01
3-21.