100Base-Fx Port Cables; Figure 2-9. Connecting 100Base-Fx Port Cables - Nortel BayStack 350 Series Manual

Using the BayStack 350 Series 10/100 Autosense Switch

100BASE-FX Port Cables

Warning: Fiber optic equipment can emit laser or infrared light that can injure
your eyes. Never look into an optical fiber or connector port. Always assume
that fiber optic cables are connected to a light source.
To connect the 100BASE-FX port cables, align the keyway on the cable plug with
the key slot on the appropriate connector, then insert the cable plug into the fiber
optic port connector
Figure 2-9.
After connecting the port cables, proceed to the next section,
Power," to connect the AC power cord and power up the BayStack 350 switch.
2-14
(Figure 2-9).
Connecting 100BASE-FX port cables
156FA
"Connecting
893-00992-E