Connecting To 10/100Base-T Interfaces - Nortel CVX 1800 Hardware Installation Manual

Connecting to 10/100BASE-T Interfaces

Each 10/100BASE-T interface on the SCC-RLTM supports one full-duplex
connection.
To connect an Ethernet unshielded twisted pair (UTP) cable to a
10/100BASE-T interface, follow these steps:
Step
1
296-1011-200 Rel. 5.0, Doc. Rev. 08.01
Action
Plug the UTP connectors into the RJ-45 receptacles.
Optical SCC-II-LTM
Chassis Connections
Connecting Network Cables
5XEthernet SCC-RLTM
3XEthernet SCC-RLTM
CVX-0056E
3-9