Configuring Scheme Authentication For Console Login; Configuring Common Aux Line Settings - HP 5130 EI series Configuration Manual

The next time you log in through the console port, you must provide the configured login password.

Configuring scheme authentication for console login

Step
1. Enter system view.
2. Enter AUX line view or
class view.
3. Enable scheme
authentication.
To use scheme authentication, you must also complete the following tasks:
Configure login authentication methods in ISP domain view.
•
To use remote authentication, configure the scheme to be used.
•
To use local authentication, configure a local user and the relevant attributes.
•
For more information, see Security Configuration Guide.
The next time you log in through the console port, you must provide the configured login username and
password.

Configuring common AUX line settings

Some common settings configured for an AUX line take effect immediately and can interrupt the current
session. Use a login method different from console login to log in to the device before you change AUX
line settings.
To log in through the console port after you configure AUX line settings, change the terminal settings on
the configuration terminal to match the line settings.
To configure common settings for an AUX line:
Step
1. Enter system view.
Command
system-view
•
Enter AUX line view:
line aux first-number
[ last-number ]
•
Enter AUX line class view:
line class aux
authentication-mode scheme
Command
system-view
22
Remarks
N/A
A setting in user line view is applied only
to the user line. A setting in user line class
view is applied to all user lines of the
class.
A non-default setting in either view takes
precedence over a default setting in the
other view. A non-default setting in user
line view takes precedence over a
non-default setting in user line class view.
A setting in user line view takes effect
immediately and affects the online user.
A setting in user line class view does not
affect online users and takes effect only
for users who log in after the
configuration is completed.
By default, authentication is disabled for
the AUX line.
Remarks
N/A