Nortel Circuit Card 311 Reference page 459

By entering R on the keyboard, you enter the Remote Loopback Modify
menu. Respond to the following prompts to enable or disable the Remote
Loopback feature.
R <CR>
Remote Loopback Disabled (or enabled, indicating current status)
Remote Loopback
(Y/N): <SP>
Y <CR> or N <CR>
Remote Loopback: Enabled (or Disabled)
By entering M on the keyboard, you enter the Manual Answer Modify menu.
Manual Answer indicates that the DAC prompts the user to answer an
incoming data call. Auto answer picks up the call after the specified number
of rings. Respond to the following prompts to enable or disable the Manual
Answer feature.
M <CR>
Current Answer Mode: Manual
Auto - xx Rings
Manual Answer? (Y/N): <SP>
Y <CR> N <CR>
Number of rings (1-255 <1>): <SP>
yy
New Answer Mode: Manual New Answer Mode: Auto - yy Rings
By entering D on the keyboard, you enter the DCD Modify menu. Respond
to the following prompts to enable DCD as Forced or Dynamic.
D <CR>
DCD Control:Dynamic
Forced On
Dynamic DCD? (Y/N): <SP>
Y <CR> N <CR>
Copyright © 2003-2008, Nortel Networks
.
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311 01.04 Standard
Release 5.0 23 May 2008
Keyboard dialing 459