Nortel Circuit Card 311 Reference page 458

458 NT7D16 Data Access card
Both the Autodial and Speed Call commands can be changed with the
Modify command (M). Additionally, the Speed Call number can be changed
in the service change. When this command is entered, the Modify menu
appears.
Modify Menu:
A - Auto Number D - DCD Control
L - Long Break M - Manual Answer
Q - Quit Modify Menu R - Remote Loopback
S - Speed Call
CTRL Z (Abort Keyboard Dialing)
Select:<SP>
Any of these choices leads to another series of prompts and responses.
By entering A on the keyboard, you enter the Autodial Modify menu.
Respond to the following prompts to change the Autodial number.
A <CR>
Current Autodial number: zzzzzzz
Enter Autodial number: <SP>
xxxxxxx <CR>
New Autodial number: xxxxxxx
By entering S on the keyboard, you enter the Speed Call Modify menu. The
Speed Call number can also be changed in the software. Respond to the
following prompts to change the Speed Call number.
S<CR>
Enter access code <SP>
Current Speed Call number: zzzzzzz
Enter Speed Call number: <SP>
zzzzzzz<CR>
New Speed Call number: xxxxxxx
Copyright © 2003-2008, Nortel Networks
.
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311 01.04 Standard
Release 5.0 23 May 2008