Table of Contents
Advertisement
Command
Description
D P
Display Performance
Displays performance counters for the current hour.
D S [P]
Display Status [Pause]
Displays carrier status, including whether the card is in the alarm state, and what
alarm level is currently active.
H or ?
Help
Displays the help screen
L
Login
Logs into the MMI terminal when the system has one Lineside T1 card
Q
Quit
Logs the terminal user out. If multiple Lineside T1 cards share a single terminal,
logout after using the MMI. Because of the shared daisy-chained link, if a Lineside
T1 card is logged in, it occupies the bus and no other Lineside T1 cards are able to
notify the MMI of alarms.
S A
Set Alarm parameters
Alarm parameters include the allowable bit errors per second threshold and alarm
duration
S C
Set Clearing
Sets the alarm self-clearing function to either enable or disable
S D
Set Date
Sets date or verifies current date
S T
Set time
Sets time or verifies current time
T x
Test
Initiates the T1 carrier test function. To terminate a test in process, enter the STOP
TEST (S) command at any time.
Configuring parameters
The MMI has been designed with default settings so that no configuration is
necessary. However, it can be configured to suit a specific environment.
Set Time
Before configuring the MMI, login to the system and enter the current time.
Do this by typing in the Set Time (S T) command set. The MMI then displays
the time it has registered. Enter a new time or press "Enter" to leave it
unchanged. The time is entered in the "hh:mm:ss" military time format.
Set Date
The current date must be set. Do this by typing in the Set Date (S D)
command set. The MMI then displays the date it has registered. Enter a
new date or press "Enter" to leave it unchanged. The date is entered in
the "mm/dd/yy" format.
Copyright © 2003-2008, Nortel Networks
.
Man-Machine T1 maintenance interface software 235
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311 01.04 Standard
Release 5.0 23 May 2008
Advertisement
Table of Contents
