Table of Contents
Advertisement
Table 120
LEI card - NT8D37 IPE module vintage level port cabling
Available and restricted card slots in the NT8D37 IPE module
If installing the LEI into an NT8D37 IPE module, the card slots available
depend on the vintage level module.
Vintage levels cabling 30 ports: For modules with vintage levels that
cabled 30 ports to the I/O panel, the LEI can be installed in any pair of
card slots 0-15.
Vintage levels cabling 16 ports: For modules with vintage levels that
cable 16 ports to the I/O panel, the LEI can be installed into the card slot
pairs shown in the following card slots:
Available:
LEIs must not be installed into the following card slot pairs:
Restricted:
If the LEI must be installed into one of the restricted card slot pairs, rewire
the IPE module card slot to the I/O panel by installing an additional NT8D81
cable from the LEI motherboard slot to the I/O panel, and re-arranging
the three backplane connectors for the affected card slots. This permits
Copyright © 2003-2008, Nortel Networks
.
Vintage Level
NT8D37BA
NT8D37DE
NT8D37EC
Motherboard/Daughterboard
0 and 1
1 and 2
4 and 5
5 and 6
8 and 9
9 and 10
12 and 13
13 and 14
Motherboard/Daughterboard
2 and 3
3 and 4
6 and 7
10 and 11
11 and 12
14 and 15
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311 01.04 Standard
Release 5.0 23 May 2008
Installation 281
Number of ports
cabled to I/O panel
30 ports
16 ports
30 ports
Advertisement
Table of Contents
