Electrical Specifications - Nortel Circuit Card 311 Reference

676 NT8D14 Universal Trunk card
Refer to Software Input/Output Reference — Administration (NN43001-611)
for instructions on service change programs.The type of intercept and
the RAN trunk parameters are defined in the Trunk Administration LD
14, Customer Data Block LD 15, and Trunk Route Administration LD 16
programs.
The Trunk Data Block and Route Data Block programs specify the following:
•
•
•
•
The Customer Data Block program defines the type of intercept and the
trunk route to which the intercept is to be connected.
Refer to Software Input/Output Reference — Administration (NN43001-611)
for more detailed instructions on service change programs.
The type of intercept and the RAN trunk parameters are defined in the
Trunk Data Block LD 14, Customer Data Block LD 15, and Route Data
Block LD 16 programs.
The Trunk Data Block and Route Data Block programs specify the RAN
trunk, the type of announcement machine, the number of repetitions of
announcements before a forced disconnect (all calls) or an attendant
intercept is initiated (CCSA/DID calls only), and the point at which the trunk
can connect to the announcement.
The Customer Data Block program defines the type of intercept and the
trunk route to which the intercept is to be connected.
Refer to Software Input/Output Reference — Administration (NN43001-611)
for instructions on service change programs.
Electrical specifications
Table 233 "Universal trunk card - trunk interface electrical characteristics"
(page 677)
Trunk card.
Copyright © 2003-2008, Nortel Networks
.
the RAN trunk
the type of announcement machine
the number of repetitions of announcements before a forced disconnect
(all calls) or an attendant intercept is initiated (CCSA/DID calls only)
the point at which the trunk may be connected to the announcement
gives the electrical characteristics of the NT8D14 Universal
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311 01.04 Standard
Release 5.0 23 May 2008