Connector Pin Assignments - Nortel Circuit Card 311 Reference

Circuit card
Table of Contents

Advertisement

824 NT8D41BA Quad Serial Data Interface Paddle Board
Figure 271
NT8D41BA QSDI paddle board block diagram
System considerations
For CS 1000 4.5 and 5.0, in dual-processor systems, the 2 card slots on the
back of a CoreNet shelf supporting CP PII and CP PIV function regardless
of which CPU is active. On Release 5.0 only the CP PII and CP PIV are
supported. In Options 61C and 81C, CS 1000SG, and CS 1000MG, four
NT8D41BB can be provisioned for a total of 16 SDI ports. One port is used
for power monitoring, leaving 15 for customer use.

Connector pin assignments

The RS-232-C signals for port 1 through port 4 are brought out on connector
J1 through J4 respectively. The pinouts for each port are identical to those
for each of the other three ports.
J4 pin assignments" (page 825)
each connector.
Copyright © 2003-2008, Nortel Networks
.
Table 320 "Connectors J1, J2, J3, and
shows the pin assignment that applies to
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311 01.04 Standard
Release 5.0 23 May 2008

Advertisement

Table of Contents
loading

This manual is also suitable for:

1000 con?guration guide

Table of Contents