Nortel Circuit Card 311 Reference page 965

This interface uses shared Static Random Access Memory (SRAM) as a
communication exchange center between the CPU and the MPU. Both the
CPU and the MPU can access this memory over the transmit and receive
channels on the bus.
Information exchange between the CPU and the MISP is performed with
packetized messages transmitted over the CPU bus. This interface has a
16-bit data bus, an 18-bit address bus, and interrupt and read/write control
lines.
This interface uses shared Static Random Access Memory (SRAM) as a
communication exchange center between the CPU and the MPU. Both the
CPU and the MPU can access this memory over the transmit and receive
channels on the bus.
MISP network bus interface
The network bus interface:
•
•
The network bus interface:
•
•
Power consumption
Power consumption is +5V at 2 A; +15V at 50 mA; and -15V at 50 mA.
Power consumption is +5V at 2 A; +15V at 50 mA; and -15V at 50 mA.
Copyright © 2003-2008, Nortel Networks
.
converts bit interleaved serial data received from the network bus into
byte interleaved data for transmission over the 32 time slots used by
the HDLC controller
accepts byte interleaved data transmitted from the HDLC controller and
converts it into a bit interleaved data stream for transmission over the
network bus
converts bit interleaved serial data received from the network bus into
byte interleaved data for transmission over the 32 time slots used by
the HDLC controller
accepts byte interleaved data transmitted from the HDLC controller and
converts it into a bit interleaved data stream for transmission over the
network bus
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311 01.04 Standard
Release 5.0 23 May 2008
Functional description 965