Nortel Circuit Card 311 Reference page 964

964 NTBK22 MISP card
•
•
•
•
Micro Processing Unit (MPU)
The MPU coordinates and controls data transfer and addressing of the
peripheral devices and communicates with the CPU using a message
channel on the CPU bus. The tasks that the MPU performs depend on the
interrupts it receives. The interrupts are prioritized by the importance of
the tasks they control.
The MPU coordinates and controls data transfer and addressing of the
peripheral devices and communicates with the Meridian 1 CPU using a
message channel on the CPU bus. The tasks that the MPU performs
depend on the interrupts it receives. The interrupts are prioritized by the
importance of the tasks they control.
High-Level Data Link Controller (HDLC)
The HDLC is a format converter that supports up to 32 serial channels that
communicate at speeds up to 64 kbps. The HDLC converts messages into
the following two message formats:
•
•
The HDLC is a format converter that supports up to 32 serial channels that
communicate at speeds up to 64 kbps. The HDLC converts messages into
the following two message formats:
•
•
CPU to MISP bus interface
Information exchange between the CPU and the MISP is performed with
packetized messages transmitted over the CPU bus. This interface has a
16-bit data bus, an 18-bit address bus, and interrupt and read/write control
lines.
Copyright © 2003-2008, Nortel Networks
.
control terminal initialization and addressing
assign B-channels for switched voice and data transmission by
communicating with the BRI terminal over the D-channel and allocating
to it an idle B-channel with appropriate bearer capabilities
separate D-channel data from signaling information and route the data
to the packet handler
send call control messages to ISDN BRI terminals over the D-channel
a serially transmitted, zero-inserted, CRC protected message that has a
starting and an ending flag
a data structure
a serially transmitted, zero-inserted, CRC protected message that has a
starting and an ending flag
a data structure
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311 01.04 Standard
Release 5.0 23 May 2008