Table of Contents
Advertisement
Figure 60
LEI card - connecting two or more cards to the MMI
Terminal configuration
For the MMI terminal to be able to communicate to the LEI, the interface
characteristics must be set to:
•
•
•
•
•
Software Configuration
Although much of the architecture and many features of the LEI card are
different from the analog line card, the LEI has been designed to emulate an
analog line card to the CS 1000 software. Because of this, the LEI software
configuration is the same as for two adjacent analog line cards.
Copyright © 2003-2008, Nortel Networks
.
speed – 1200 or 2400 bps
character width – 7 bits
parity bit – mark
stop bits – one
software handshake (XON/XOFF) – off
Nortel Communication Server 1000
Circuit Card Reference
NN43001-311 01.04 Standard
Release 5.0 23 May 2008
Installation 287
Advertisement
Table of Contents
