Setting The Telephone Line Type; Checking The Date And Time - Sharp MX-3050N User Manual

FACSIMILE►BEFORE USING THE MACHINE AS A FAX
Make sure the main power switch is in the "
2
When the main power indicator is lit up, the main power is in the "
turn the main power switch to the "
*If the fax function will be used, and in particular if reception or timer transmission will take place at night, always keep
the main power switch in the "
Main power switch
If the fax function will be used, and in particular if reception or timer transmission will take place at night, do not turn the
main power off.

Setting the telephone line type.

3
The machine's dial mode setting must be set to match the type of telephone line you are using.
* If the setting is incorrect, it may result in dialling failures or cause calls to be made to the wrong destination.
• If you want to set the type of telephone line automatically
In "Settings (administrator)", select [System Settings] → [Image Send Settings] → [Fax Settings] → [Default Settings]
→ [Dial Mode Setting], and tap the [Auto Select] key.
• If necessary, you can set the type of telephone line manually.
• This setting can only be activated in Canada.

Checking the date and time.

4
Verify that the correct date and time are set in the machine.
To set the date and time of the machine:
In "Settings", select [System Settings] → [Common Settings] → [Clock Adjust].
If [Disabling of Clock Adjustment] has been enabled, the date and time cannot be modified.
In "Settings (administrator)", select [System Settings] → [Common Settings] → [Enable/Disable Settings]
→ [Operation Settings] → [Disabling of Clock Adjustment], and cancel the adjustment disabling setting.
" position and press the [POWER] button on the operation panel.
" position.
Main power indicator
4-5
" position.
" position. If the main power indicator is not lit up,
[Power] button