Selecting The Paper Tray For Copying - Sharp MX-3050N User Manual

COPIER►BEFORE USING THE MACHINE AS A COPIER
SELECTING THE PAPER TRAY FOR
COPYING
The machine is set to automatically select a tray that has the same size of paper as the size of the placed original
(automatic paper tray selection).
If the original size cannot be detected correctly because it is a non-standard size or when you want to change the paper
size for copying, you can select the paper tray manually.
If the selected tray runs out of paper during a copy job and there is another tray that has the same size and type of paper,
that tray will be automatically selected and the copy job will continue.
To change the initially selected tray:
In "Settings (administrator)", select [System Settings] → [Copy Settings] → [Initial Status Settings] → [Paper Tray].
Tap the [Paper Select] key.
1
► COPYING SEQUENCE (page 2-7)
Tap the required tray key.
2
After the settings are completed, tap
In Easy mode
Paper Select
1
2
3
4
CA
Preview
• When the bypass tray is selected, specify the paper type and size based on the paper loaded into the bypass tray.
► SPECIFYING A TYPE AND SIZE OF PAPER LOADED ON BYPASS TRAY (page 2-40)
• In normal mode, you can also open the [Paper Select] screen by tapping the machine image on the base screen.
To automatically select the tray, tap the [CA] key.
.
A4
A4
Plain
Type and Size
B5
B4
A3
Copies
B/W
Start
In Normal mode
Paper Select
Paper Tray
A4
1
Plain
A4
2
Plain
A4
3
Plain
A4
4
Plain
Colour
Start
Others
2-13
Change Type and Size of
No. of copies
1
Tray Specified Currently
Original
Change Size/Direction.
Copy Ratio
Bypass Tray
Enlarge/Reduce Copy
A4
2-Sided Copy
Plain
Margin Shift
Type and Size
Shift Position to Have Margin
Preview
B/W Colour
Start Start
4 A3
CA