Selecting The Orientation And Size Of The Original - Sharp MX-3050N User Manual

COPIER►BASIC PROCEDURE FOR MAKING COPIES
SELECTING THE ORIENTATION AND SIZE
OF THE ORIGINAL
When the original size is a non-standard size or is not detected correctly, manually specify the original size.
Set the orientation of the image to ensure that the orientation of the placed original is correctly recognized.
• Set the orientation and size of the original before scanning the original.
• The original size is set in normal mode.
Specifying the orientation of the original
By specifying the starting side (top or left side) of the placed original, the orientation of the original will be correctly
recognized.
Finishing position settings and N-Up layout settings are specified using the recognized orientation.
In Easy mode
Original
CA
Copies
Preview
Specifying the orientation and size of an AB-size original
Tap the [Original] key to set the orientation of the original.
1
► COPY MODE (page 2-3)
Tap the [Detail] key to change to normal mode.
2
► Changing mode from each mode (page 2-5)
Tap the [Original] key.
3
Tap the [AB] tab.
4
In Normal mode
Original
Auto
B/W Colour
Start Start
2-33
No. of copies
1
Image Orientation
A4
Direct Entry
AB Inch Custom Size
A5 B5R B4
A5R A4 A3
B5 A4R 216 x 340
216 x 343
Others
Colour Mode
2-Sided Copy
Background Adjustment
Blank Page Skip
Skip Blank Page in Original
Copy Ratio
Enlarge/Reduce Copy
Preview CA
B/W Colour
Start Start