Sharp MX-3050N User Manual page 787

SYSTEM SETTINGS►SYSTEM SETTINGS
Default Verification Stamp
This is used to enable or disable the default setting. Enable this to always affix the verification stamp on the original that
has already been scanned using the automatic document feeder. Configure the setting for each of the following items:
• E-mail/Scan/Data Entry
• Fax/Internet Fax
Erase Width Adjustment
This is used to set the default erase width for erase function. Specify a value from 0 mm (0") to 25 mm (1") in increments
of 3 mm (1/8") for both edge erase and centre erase.
Time Specified Output of Received Data
This function is available when the Received Data Image Check Setting is enabled.
* This is displayed when a facsimile expansion kit or Internet fax expansion kit is installed.
If "Time Specified Output of Received Data" is set to
If "Change Password" or "Hold Setting for Received Data Print" is set to
Enable/Disable Settings
Settings to Disable Registration
Storing from the machine, storing from Setting mode (Web version), and storing from the PC can each be separately
prohibited.
Disable Registering Destination from Operation Panel
Disables address control from the machine.
Configure the setting for each of the following items:
• Group (Direct Entry)
• Group (Address Book)
Select All: Selects all items.
Clear Checked: Clears all selections.
Disable Registering Destination on Web Page
Disables to store the destination from Setting mode (Web version).
Configure the setting for each of the following items:
• Group (Direct Entry)
• Group (Address Book)
• Contacts
Select All: Selects all items.
Clear Checked: Clears all selections.
Disable Registration/Delection of All Program Items
This is used to prohibit the deletion and changing of image send settings stored in job programs.
Disable Registration of Memory Box
Disables all types of memory box registration.
Configure the setting for each of the following items:
Polling Memory, Confidential, Relay Broadcast (Direct Entry), Relay Broadcast (Address Book)
Disable Destination Registration Using Global Address Search
This disables address control from the global address search.
Configure the setting for each of the following items:
E-mail, Internet Fax, Fax
Disable Registration Using Network Scanner Tool
This disables address control from the Network Scanner Tools.
Use this option to suppress to store data of another machine through Inbound Routing of address book.
Disabling of Forwarding via Network
This prohibits inbound routing.
Settings to Disable Transmission
These settings are used to disable the following transmission operations.
, this setting is greyed out.
, the password entry field is greyed out.
7-92