Clock Adjust; Daylight Saving Time Setting - Sharp MX-3050N User Manual

SYSTEM SETTINGS►SYSTEM SETTINGS

Clock Adjust

This is the first and basic setting for operating the machine.
Use this to set the date and time in the machine's built-in clock.
If [System Settings] in "Settings (administrator)" → [Common Settings] → [Enable/Disable Settings] → [Disabling of Clock
Adjustment] is enabled, the date and time cannot be set.
Item
Specify Time Zone
Date&Time Settings
Synchronize with Internet Time
Server

Daylight Saving Time Setting

This is the first and basic setting for operating the machine.
Enable daylight saving time.
If [System Settings] in "Settings (administrator)" → [Common Settings] → [Enable/Disable Settings] → [Disabling of Clock
Adjustment] is enabled, the date and time cannot be set.
Item
Daylight Saving Time Setting
Select Setting Type
Start Time
End Time
Adjustment Time
When this function is used, the time changes at the beginning and end of daylight saving time as indicated in the table
below.
Area
Europe*
Australia, New Zealand
Other countries
* In some countries, the starting and ending times of daylight saving time may be different than the times set in the
machine.
If your region is ahead of GMT (Greenwich Mean Time), select [+]. If your region is behind
GMT, select [-]. Next, specify the time difference between your region and GMT in hours
and minutes. (Example: If your region is Japan, + 9 hours 00 minutes.)
Select and set the year, month, day, hour, and minute.
This can be used when the machine is connected to the Internet. The machine's time is
automatically adjusted to the time of an Internet time server.
Select whether or not the Daylight Saving Time Setting is enabled. If disabled, the following
settings will not be possible.
Specify whether the starting and ending day of daylight saving time are to be set using the
day of the week or the date.
Set the starting time of daylight saving time. If you selected "Day of the Week" in "Select
Setting Type", set the starting week of daylight saving time and then the starting day. If you
selected "Date" in "Select Setting Type", set the starting date. Set the hour and minute and
the UTC (Coordinated Universal Time) setting.
Set the ending time of daylight saving time in the same way as you set the starting time.
Set the time to be adjusted when daylight saving time begins.
Standard time ➞ Daylight saving time
Last Sunday in March, 1:00 to 2:00 AM
Last Sunday in October, 2:00 to 3:00 AM
Select the [Daylight Saving Time Setting] checkbox so that a checkmark
setting is configured to normal time plus one hour. When the
normal time.
7-130
Description
Description
Daylight saving time ➞ Standard time
Last Sunday in October, 1:00 to 0:00 AM
Last Sunday in March 3:00 to 2:00 AM
is selected, clock returns to
appears. The clock