Sharp MX-3050N User Manual page 780

SYSTEM SETTINGS►SYSTEM SETTINGS
Initial Status Settings
If you print data in an environment where the printer driver is not used (that is, if you print data using the MS-DOS
system or if you print data using the PC that does not have the provided printer driver installed), set the detailed printing
conditions. (However, the "Disable Blank Page Print" function will be effective even when the PCL printer driver is used.)
Settings
Setup Items
Copies
Orientation
Paper Size
Output Tray
Paper Type
Resolution Setting
Disable Blank Page Print
2-Sided Print
Colour Mode
*2
N-Up Print
*5
Fit To Page
Output
Separator Page
1 - 9999 sets
• Portrait
• Landscape
Set the default paper size.
Set the default delivery tray.
Set the default paper type.
• 600dpi
• 600dpi (High Quality)
*1
• 1200dpi
• (Enabled)
• (Disabled)
• 1-Sided
• 2-Sided(Book)
• 2-Sided(Tablet)
• Auto
• Black & White
N-Up
• 1-Up
• 2-Up
• 4-Up
• 8-Up
Layout
*3
• Left to Right
*3
• Right to Left
*4
• Right, and Down
*4
• Down, and Right
*4
• Left, and Down
*4
• Down, and Left
• (Use Fit to Page)
• (Do not use Fit to Page)
• (Use Print per Unit)
• (Do not use Print per Unit)
*6
• Staple Position : None, 1 Staple at Back, 2 Staples, 2 Staples (Top)
• (Use Punch) *7
*7
• (Do not use Punch)
• Insert Before Job
• Insert After Job
7-85
Description
Paper Tray
Paper Tray