Sharp MX-3050N User Manual page 171

COPIER►BEFORE USING THE MACHINE AS A COPIER
Orientation of placed original
Place the original as shown below.
If you place the original in an incorrect orientation, it may result in punching at an unexpected position or stapling. On
"Preview Screen", view the image orientation or preview image.
COPY PREVIEW (page 2-9)
►
Document glass
c b a
Set the orientation of the image to ensure that the orientation of the placed original is correctly recognized.
For information on the orientation of the original, see
Automatic copy image rotation (Rotation Copy)
If the orientation is different between the original and paper, the original image will be automatically rotated 90 degrees
to match the paper.
Orientation of placed original
The original seen
from behind
To set Rotation Copy:
In "Settings (administrator)", select [System Settings] → [Copy Settings] → [Condition Settings] → [Rotation Copy Setting].
The rotation copy function is available in the automatic paper selection or automatic ratio selection mode, or when the
original or paper size is the same while the orientation is different.
"Specifying the orientation of the original (page
Orientation of paper
2-12
Document feeder tray
abc
2-33)".
The image is rotated 90 degrees
The paper seen from behind